KTM Steering Stem Headstock Taper Bearing 29 x 50.25 x 15mm - 22-1026
Replacement tapered roller steering stem / headstock bearing suitable for a very wide range of KTM motocross, enduro and off-road motorcycles.
Designed for use in the steering head assembly, this bearing supports the steering stem and allows smooth, controlled movement of the front end. Worn steering bearings can cause excessive play, notchy steering, poor handling or an uneven feel when turning the handlebars.
Ideal for replacing a worn, corroded or damaged original steering head bearing.
FEATURES
- Tapered roller steering stem / headstock bearing
- Suitable for upper or lower steering bearing applications where this size is specified
- Heavy duty tapered roller design
- Replacement for worn or damaged steering bearings
- Suitable for motocross, enduro and off-road motorcycles
- Cross-reference: 22-1026
BEARING SIZE
Inner Diameter: 29mm
Outer Diameter: 50.25mm / nominal 50.3mm
Width: 15mm
COMPATIBLE KTM MODELS
KTM SX / SX-F
Suitable for a wide range of KTM SX and SX-F motorcycles including applicable:
125 SX
144 SX
150 SX
200 SX
250 SX
250 SX-F
350 SX-F
450 SX-F
505 SX-F
KTM XC / XC-F / XC-W / XCF-W
Suitable for a wide range of applicable:
125 XC
150 XC / XC-W
200 XC / XC-W
250 XC / XC-F / XC-W / XCF-W
300 XC / XC-W
350 XC-F / XCF-W
450 XC-F / XC-W
500 XCF-W / XC-W
KTM EXC / EXC-F
Suitable for a wide range of applicable:
125 EXC
150 EXC
200 EXC
250 EXC / EXC-F
300 EXC
350 EXC-F
400 EXC
450 EXC / EXC-F
500 EXC / EXC-F
520 EXC
525 EXC
530 EXC
This bearing size is used across many additional KTM models and model years. Compatibility should be confirmed using bearing dimensions or the 22-1026 cross-reference.
CROSS-REFERENCE
22-1026
PACKAGE INCLUDES
- 1 x Steering Stem Taper Roller Bearing
IMPORTANT INFORMATION
This listing is for one individual bearing only and is not a complete 22-1026 bearing and seal kit.
The 22-1026 reference is used as a fitment cross-reference. Complete 22-1026 kits normally contain two tapered bearings plus associated seals and O-ring components.
Please check the dimensions of your original bearing before ordering, particularly on motorcycles where the steering stem, yokes or front end may have previously been replaced.
Cross-reference numbers are supplied for fitment identification purposes only.
This is a quality aftermarket replacement part and is not manufactured or endorsed by KTM or All Balls Racing. Manufacturer and model names are used for compatibility identification purposes only.
