PE28 Carburettor Air Fuel Mixture Adjustment Screw & Spring – Pit Bike MX
Replacement air/fuel mixture adjustment screw and spring designed for compatible PE28 28mm motorcycle and pit bike carburettors.
This precision adjustment screw allows fine tuning of the carburettor's idle and low-throttle mixture, helping achieve smooth idling, clean throttle response and consistent engine performance.
Ideal for replacing a damaged, seized, worn or missing original mixture screw, this assembly features a brass-coloured metal adjustment screw with an external steel spring to help maintain the selected adjustment.
Suitable for carburettor servicing, rebuilding and routine maintenance on compatible PE28 carburettor models.
Features
- Designed for PE28 carburettors – replacement idle mixture adjustment screw.
- Allows fine adjustment of the carburettor's idle and low-speed fuel/air mixture.
- Brass-coloured metal construction with a precision tapered adjustment tip.
- Includes a steel tension spring to help prevent unwanted adjustment movement.
- Slotted head for adjustment using a flat-blade screwdriver.
- Ideal for carburettor repairs, servicing and rebuilding.
- Replacement for damaged, worn, seized or missing original mixture screws.
Fitment / Compatibility
- Carburettor Type: PE28
- Carburettor Size: 28mm
- Application: Idle Air/Fuel Mixture Adjustment
- Component: Mixture Adjustment Screw & Spring
- Common Vehicles: Pit Bikes, Dirt Bikes, MiniGP, Supermoto and MX Motorcycles
Designed for compatible PE28-style carburettors commonly used on pit bikes, dirt bikes and custom motorcycle applications.
Important: Not all PE28 or PE28-style carburettors use identical mixture adjustment screws. Please compare the thread, overall length, tapered tip and original screw design before ordering. Fitment to other PE-series carburettors is not guaranteed.
Package Includes
- 1 x PE28 Carburettor Mixture Adjustment Screw
- 1 x Mixture Screw Tension Spring
Basic Fitting & Adjustment Guide
- Confirm that your carburettor uses the same mixture screw design as the replacement.
- Carefully remove the original adjustment screw, noting its setting by counting the turns required to gently seat it.
- Remove the original spring and inspect the adjustment screw passage for dirt or damage.
- Check whether your carburettor also uses a separate washer or O-ring and ensure all required components are present.
- Install the replacement screw and spring, carefully engaging the threads by hand.
- Turn the screw clockwise until it is lightly seated. Do not overtighten or force the tapered tip.
- Back the screw out to the carburettor manufacturer's recommended initial setting, or the previously recorded setting where appropriate.
- Warm the engine to normal operating temperature and make small adjustments to achieve a stable idle and clean initial throttle response.
- Recheck the idle speed after completing the mixture adjustment.
Fitting Tip: Whether turning the screw out enriches or leans the mixture depends on the carburettor's circuit design. An air screw and a fuel screw operate differently. Always identify the adjustment type before tuning.
Frequently Asked Questions
What does the PE28 mixture screw do?
The mixture adjustment screw controls the idle and low-throttle mixture through the carburettor's pilot circuit. Correct adjustment helps the engine idle smoothly and respond cleanly when opening the throttle.
Will this fit all PE28 carburettors?
No. Although designed for compatible PE28 carburettors, different manufacturers and aftermarket versions may use different thread sizes, lengths and tapered tips. Always compare your original screw before purchasing.
Can a damaged mixture screw cause poor idling?
Yes. A damaged, incorrectly adjusted or missing mixture screw can affect idle quality and low-throttle running. Other possible causes include blocked pilot jets, air leaks and incorrect carburettor settings.
How many turns out should the mixture screw be?
The correct initial setting varies depending on the carburettor manufacturer and model. Follow the recommended specification for your particular PE28 carburettor and make final adjustments with the engine fully warmed up.
Does turning the mixture screw out make the engine richer?
It depends on whether the carburettor uses an air screw or a fuel screw. On a conventional fuel screw, turning out generally enriches the mixture. On an air screw, turning out generally makes the mixture leaner.
Why does the mixture screw have a spring?
The spring applies tension to the adjustment screw, helping prevent vibration from changing the selected mixture setting while the motorcycle is running.
Will this fit a PE24, PE26 or PE30 carburettor?
Compatibility with other PE-series carburettors is not confirmed. Always compare the original adjustment screw dimensions and design before purchasing.
Important Notes
- Designed for compatible PE28 28mm carburettors.
- Check the original screw dimensions and thread before ordering.
- Do not force or overtighten the tapered adjustment tip.
- Ensure any required sealing washer or O-ring is correctly installed.
- Carburettor tuning should be carried out with the engine at normal operating temperature.
- Supplied as an adjustment screw and spring only. Carburettor and other components are not included.
RED CIRCLES MOTORCYCLES – Quality Pit Bike, Mini Moto, MX & Motorcycle Parts.
```